fine horse products
| Home |
| View Cart |
| Just Equus offers fine horse products that celebrate the intelligence of nature AND the benefits of science. Whether your ride dressage, eventing, jumping, endurance, or western, come see our featured horse products which include: Vogue & Fhoenix Soft-tree Saddles, Sonnenreiter, Arista, FITS, Cool Meidcs, Thinline, Baretek, Back on Track, Moxie Himalayan Salts, Just Equus Browbands, Natural Supplements, UV Wear, Gloves, Riding Socks, MDC Stirrups, Hip Savers, Seatbone Savers,, Beauty Products and more! |
|
| Please call us with your questions! 650-851-2412 |
Horse Cooling Wear:
Charged with water, Cool Medics Wear cools Horses & Riders.
Scroll down for more information on Cool Medics technology...
Charged with water, Cool Medics Wear cools Horses & Riders.
Scroll down for more information on Cool Medics technology...
|
How It Works:
cOOLMEDICS products are constructed from a patented three-layer fabric that by combining hydrophilic fibers into a fibrous batting core
and a thermally conductive lining, will provide cooling after allowing the product to soak in water for 30 seconds to one minute. Not longer.
The water activates the cooling process by charging the fibers with moisture and creating an environment for evaporation. When moisture
in the batting evaporates, heat is removed and cools the surrounding area, transferring the cooling effect to the wearer.
Depending upon the environment this cooling could last up to 8 hours, and can be recharged again by simply immersing the product in
water to restart the cooling process.
We have laboratory tested this cooling process in a heat chamber, bringing the inside temperature to 114 degrees, and placing the
dampened cloth in this heated chamber.
In every test, the fabric, with a separate temperature sensor, has maintained a temperature that is lower by 20 to 25 degrees, for a period
of 4 1⁄2 hours, before climbing to the temperature inside the chamber.
Taking the same cloth and recharging it, by immersing in water for 2 minutes, and replacing it in the hot chamber, immediately brought
the temperature done to the lower 20-25 degree range.
Activate:
A simple 3-step process.
•Step 1: Immerse the product in water for 30 seconds to one minute so that the fabric absorbs the water right to the inner filling. The water
does not need to be cold water for this activation process to work.
•Step 2: Gently wring out the excess water so that the product is wet, but not dripping. You may towel dry the inner membrane if you
require.
•Step 3: Wear the product. You will be pleasantly surprised how cool you will instantly feel.
Re-Activate:
After a period of time if you feel the product is not cooling you sufficiently, simply repeat the 3 step process.
It might become apparent that while you are wearing the product, it starts to feel that the cooling process has diminished, and it is no
longer cooling you. Just like a swimming pool, if you get out the pool because it feels warm, and back in again, to a cool pool, the product
will perform the same. Taking off the product, waiting a few minutes and then wearing the product again will feel like the product has
been reactivated.
cOOLMEDICS products are constructed from a patented three-layer fabric that by combining hydrophilic fibers into a fibrous batting core
and a thermally conductive lining, will provide cooling after allowing the product to soak in water for 30 seconds to one minute. Not longer.
The water activates the cooling process by charging the fibers with moisture and creating an environment for evaporation. When moisture
in the batting evaporates, heat is removed and cools the surrounding area, transferring the cooling effect to the wearer.
Depending upon the environment this cooling could last up to 8 hours, and can be recharged again by simply immersing the product in
water to restart the cooling process.
We have laboratory tested this cooling process in a heat chamber, bringing the inside temperature to 114 degrees, and placing the
dampened cloth in this heated chamber.
In every test, the fabric, with a separate temperature sensor, has maintained a temperature that is lower by 20 to 25 degrees, for a period
of 4 1⁄2 hours, before climbing to the temperature inside the chamber.
Taking the same cloth and recharging it, by immersing in water for 2 minutes, and replacing it in the hot chamber, immediately brought
the temperature done to the lower 20-25 degree range.
Activate:
A simple 3-step process.
•Step 1: Immerse the product in water for 30 seconds to one minute so that the fabric absorbs the water right to the inner filling. The water
does not need to be cold water for this activation process to work.
•Step 2: Gently wring out the excess water so that the product is wet, but not dripping. You may towel dry the inner membrane if you
require.
•Step 3: Wear the product. You will be pleasantly surprised how cool you will instantly feel.
Re-Activate:
After a period of time if you feel the product is not cooling you sufficiently, simply repeat the 3 step process.
It might become apparent that while you are wearing the product, it starts to feel that the cooling process has diminished, and it is no
longer cooling you. Just like a swimming pool, if you get out the pool because it feels warm, and back in again, to a cool pool, the product
will perform the same. Taking off the product, waiting a few minutes and then wearing the product again will feel like the product has
been reactivated.
Frequently Asked Questions:
Q: How long will this product stay cool?
A: This will depend on a number of factors, which will include the outside temperature, the humidity and the wind factor.
Ideally this product will stay cool anything from 4 to 8 hours in a hot dry temperature with or without a wind factor.
Q: How do I start the cooling process?
A: Simply immerse the product in water for 30 seconds to one minute, wring out the excess water, give it a brief shake,
towel dry the inside finely woven lining, if required, and wear the product.
Q: How do I re activate, when I feel the product is not so cool anymore?
A: Same answer, just re immerse in the water and the cooling process will start again.
Q: Can this product be washed when dirty?
A: Yes, wash gently by hand, in cold or cool water with a mild soap, like Woolite, and lay flat to dry. Store only when dry to
prevent mildew. Do not use any bleaches.
Q: How many times can I place this product in water?
A: approximately about 400 times
Q: How long will this product stay cool?
A: This will depend on a number of factors, which will include the outside temperature, the humidity and the wind factor.
Ideally this product will stay cool anything from 4 to 8 hours in a hot dry temperature with or without a wind factor.
Q: How do I start the cooling process?
A: Simply immerse the product in water for 30 seconds to one minute, wring out the excess water, give it a brief shake,
towel dry the inside finely woven lining, if required, and wear the product.
Q: How do I re activate, when I feel the product is not so cool anymore?
A: Same answer, just re immerse in the water and the cooling process will start again.
Q: Can this product be washed when dirty?
A: Yes, wash gently by hand, in cold or cool water with a mild soap, like Woolite, and lay flat to dry. Store only when dry to
prevent mildew. Do not use any bleaches.
Q: How many times can I place this product in water?
A: approximately about 400 times
|
Contact us
650-851-2412
info@justequus.com
650-851-2412
info@justequus.com
Shop Topics
For Horse
For Rider
Contact us
650-851-2412
info@justequus.com
650-851-2412
info@justequus.com
| Please call us with your questions! 650-851-2412 |
| Go To . . . |
copyright 2007-2009 Just Equus, all rights reserved, web design by Just Equus, www.justequus.com
Contact us
650-851-2412
info@justequus.com
650-851-2412
info@justequus.com
White Black Pink Sky Navy Purple Chocolate Silver Forest Green Baby Blue Tan Antique Gold
Standard Cool Medics Colors: